Design, installation, annual SS 555:2018 audits and BCA CSC03 submissions, for housing, commercial and industrial buildings.
A strike doesn't have to hit a person to cause damage. It starts fires, destroys equipment, takes systems offline and creates real liability for whoever owns the building.
A properly designed lightning protection system gives that energy a deliberate, tested route into the ground, away from the structure, the wiring and the people inside it.
We design, install, test and certify those systems, and we inspect them every year so they still work when they're needed.
The strike lands here by design. Terminals are positioned to a calculated protection zone, never by eye.
Every conductor is cross-bonded at the ridge, so the current always has more than one route down.
The charge runs to earth on a fixed, clamped route, held to the roof rather than clipped to it.
At the base it bonds into the structure's steel through a test point, so the whole system can be measured each year.
Full design and installation of lightning protection for housing, industrial and commercial buildings, sized to a calculated protection zone.
Audit and risk assessment of existing systems, as the Singapore Standard expects each year, with a written outcome.
Where an audit finds a broken conductor, a corroded joint or a missing bond, we rectify it and re-test.
Testing and commissioning, plus preparation and submission of the BCA Certificate of Supervision.
Earth electrodes, bonding into structural steel and earth test points, designed and measured rather than assumed.
Distribution boards, surge-protection provisions and the electrical installation the system connects into.
